See what our Experts say about this Bauer Products RV Door Locks

• Replacement TriMark Door Lock For 2003 VW Rialta Winnebago
  The Bauer Products Camper Door Lock # BA65FR will work great as a replacement for your current TriMark door lock. This door lock will fit cutouts that are 5-1/4" wide and 4-1/2" tall, and can also be keyed alike to other Bauer locks, so you don't carry around a ton of keys.
  view full answer...
• Why Doesn't The Bauer Products Camper Door Lock # BA65FR Include The Strike Plate Rods
  The Bauer Products Camper Door Lock # BA65FR not including the two stabilizing rods is simply just a cost cutting measure. The option is still there to add them in but you would need to get those directly from Bauer Products.
  view full answer...
  
• Looking for Horse Trailer Door Latch Replacement
  Hey Lexie, the closest thing we have is the # BA65FR. This fits cutouts that are 5-1/4" wide x 4-1/2" tall. The little bit of extra height on your cutout won't be a problem since the face is 5-1/2" tall and would cover the opening. However, you would have to increase the width of your cutout slightly to make this fit. Is it possible to enlarge the cutout?
  view full answer...
• Finding a Replacement Door Lock for a 1980 Trillium Camper
  Hey Colleen, thanks for reaching out! What is the cutout size for your door lock? I was watching some videos on the internet that showed '70s and '80s Trillium campers and those showed some pretty big plates that the locks were built into - much bigger than the Bauer Products European Style RV Entry Door Lock # BA38AR you're looking at. Something like the Bauer Products Camper Door Lock # BA65FR which fits a 5-1/4" wide x 4-1/2" tall cutout would be geared a little more towards the size...
  view full answer...
• Looking for Replacement Door Latch for 2001 Silver Star 2H
  Hey Audra, do you know the size of your doors cutout where the current latch installs? If it happens to be 5-1/4 inch by 4-1/2 inch then the part # BA65FR would be a great option. If you have a different size cutout let me know and I'll see what you'd need. This has a deadbolt like you are looking for as well.
  view full answer...
• Recommended Replacement Door Lock for a TriMark 1993/72130
  Pierre, the Bauer Products Camper Door Lock # BA65FR will work great as a replacement for your current TriMark door lock. This door lock will fit cutouts that are 5-1/4" wide and 4-1/2" tall, and can also be keyed alike to other Bauer locks, so you don't carry around a ton of keys. |Français| Pierre, la serrure de porte de camping-car Bauer Products # BA65FR fonctionnera parfaitement en remplacement de votre serrure de porte TriMark actuelle. Cette serrure de porte s'adapte aux découpes...
  view full answer...
• Replacement Latch for 1997 Exiss Horse Trailer
  Hey Mary! Thank you for providing the cutout dimensions. The Bauer Products Camper Door Lock # BA65FR is the closest fit requiring a 5-1/4" wide x 4-1/2" tall cutout so it will work. However, you will have to enlarge the width by 1/4". Your additional 1/4" of height you have won't be an issue since the face of the latch will cover it on both sides. If you need anything else feel free to reply below.
  view full answer...
• Does the Lock Control the Handle on the Bauer Products Camper Door Lock BA65FR?
  The lock only controls the deadbolt on the Bauer Products Camper Door Lock item # BA65FR.
  view full answer...
• Is Bauer Products Camper Door Lock Available In Left Handed Configuration
  Hi Susie; the Bauer Products Camper Door Lock # BA65FR is only available as the right handed version. They do not have a left handed configuration for this particular door latch. Do you specifically need a left handed door lock? If so, can you tell me your cutout size? If you give me that information I can see if one is available.
  view full answer...
• Solution for Replacement Door Latch for Trimark 72130
  Hey Eleanor, the closest thing we have is the # BA65FR. This fits cutouts that are 5-1/4" wide x 4-1/2" tall. The little bit of extra height on your cutout won't be a problem since the face is 5-1/2" tall and would cover the opening. However, you would have to increase the width of your cutout slightly to make this fit
  view full answer...
• What Door Latch Replacement do You Have for My Old Wells Cargo Recessed Door Latch Cutout 5"x6 1/2"
  Hello Jayden, Thank you for the pictures, especially showing the measurements of the opening. We do not have anything that large so you will need to modify the cutout to make it smaller. The Full Size Locking Steel Flush Door Latch # L3980 that you were looking at would be a great option, it would require you to modify the cutout to 3-3/8" x 4-5/8", it fits doors up to 1 1/16" thick. The largest option we have fits in a cutout of 5-1/4" wide x 4-1/2" tall, and door width of 1-1/4"...
  view full answer...
• Install Video to Use for Install of Bauer Products RV Slam Latch
  Hey Angel, so while we don't have a set of install instructions for the Bauer door latch # BA65FR that you referenced I attached an install video link to this page for the similar Global Link RV door latch that will show you the entire process of removal of old latch and install of new latch.
  view full answer...
• Replacement Entry Door Latch For An Exiss SS 20 RP Horse Trailer
  Hi Craig, There unfortunately isn't a guide to tell us what entry door latch your horse trailer has so you'll need to remove the backing plate of the latch and measure the cutout hole. Once we know the sizing I can then pick out a compatible replacement.
  view full answer...
• Replacement Door Latch for 1998 Featherlite Horse Trailer
  Hey James! The closest option we have is the Bauer Products Camper Door Lock # BA65FR you were looking at. This fits cutouts that are 5-1/4" wide x 4-1/2" tall. Since your cutout is taller you will have to fill it in with some wood or other material. It won't take much since the face of the latch measures 6-7/8" wide x 5-1/2" tall so it will cover most of the opening.
  view full answer...
• Looking for RV Latch to Fit Cut Out that Measures 4 inch by 4 inch
  Hey Dave, the closest thing we have is the # BA65FR. This fits cutouts that are 5-1/4" wide x 4-1/2" tall. Could you possibly open the cut out a bit larger?
  view full answer...
• Replacement Door Lock for 2001 Rexhall Aerbus
  Hi Dale; we do not have an exact match so the best I can offer for your 2001 Rexhall Aerbus is the # BA65FR you were looking at. With a 4" x 4" cutout you can still use this door lock. You will have to enlarge the opening since it requires a cutout that is 5-1/4" wide x 4-1/2" tall. If you would rather not enlarge the opening you can try checking with the lock manufacturer or a local RV repair shop. However, since that was made in 2001 the latch style/company that made it probably won't...
  view full answer...
• Replacement Door Handle for 2011 Palomino Puma
  Hi Mike; the closest thing we have to a door handle that fits a 2-3/4" x 4-3/4" cutout is the # 295-000019 you were looking at. This fits cutouts that are 2-1/2" wide x 3-1/2" tall to 3" wide x 4" tall. What you can do is take a piece of wood or plastic or other material and use it to fill in the space so you don't have a gap after installation. The other option would be to use the # BA65FR which will require widening the width of your cutout. This entry door lock fits cutouts that are...
  view full answer...
• Do You Have a RV Entry Door Lock for My Cutout that is 4.95" X 4.85"? Do You Have a Keyless Option?
  Hello Matthew, We have something that will work for you, but it will take some very slight modification. The Bauer Products Camper Door Lock - Black # BA65FR requires a cutout of 5-1/4" wide x 4-1/2" tall, so you would need to widen your opening by about 1/4" for this lock to fit properly. Since the outside dimensions are 5-7/8" wide x 5-1/2" tall, it will easily cover the existing hole. If you’d prefer to use something like the Bauer EM RV Entry Door Lock for Motorhomes - Bluetooth...
  view full answer...
• Entry Door Latch for 2014 Keystone Springdale 21
  Hey Jeff! Is that 4" wide x 4-3/4" tall? The Global Link # 295-000019 you looked at is close but you would have to fill in some space in your cutout since the latch face still wouldn't cover the opening. The other option we have would be the Bauer Products Camper Door Lock # BA65FR this fits cutouts that are 5-1/4" wide x 4-1/2" tall. You will have to enlarge it so it is slightly wider to fit but vertically it will be fine. The 1/4" difference will be covered by the face of the latch which...
  view full answer...
• Availability of Entry Door Latch for 4-7/8" x 4-3/4" Cutout
  Hi Gene; the closest thing we have is the # BA65FR. This fits cutouts that are 5-1/4" wide x 4-1/2" tall. The little bit of extra height on your cutout won't be a problem since the face is 5-1/2" tall and would cover the opening. However, you would have to increase the width of your cutout slightly to make this fit.
  view full answer...
• Replacement Entry Door Lock for Forest Hill 31BH2B
  Hey Terrence! We don't have a way of knowing what door lock is currently on your Forest Hill 31BH2B. To find a replacement you will need to measure the cutout on your door. For example, if your cutout measures 5-1/4" wide x 4-1/2" tall and your door is 1-1/4" to 1-1/2" thick you can use the Bauer Products Camper Door Lock # BA65FR you were looking at. If the cutout is smaller you can always enlarge it to fit the new door latch. If your cutout is drastically different I would be happy...
  view full answer...
• Do You a Dead Bolt Camper Door Latch for My Sundowner Horse Trailer with 5" By 5 1/2" Opening?
  Hello Luke, The best option we have would be the size you were looking at, the Bauer Products Camper Door Lock - Black # BA65FR. Since this fits a cutout of 5-1/4" wide x 4-1/2" tall. You might need to make your opening a 1/4" wider, but then fill in the height with some wood or some other material. What kind of horses do you have? Do you show, race, etc?
  view full answer...
• Replacement Entry Door Lock On A 2004 Featherlight Horse Trailer
  We have a very similar entry door lock with the Bauer Products Camper Door Lock # BA65FR. The configuration appears to be very similar to the lock on your 2004 Featherlight horse trailer. The Bauer lock is made to fit a cutout 5-1/4" wide x 4-1/2" tall. So your cutout may have to be widened ever so slightly. The face plate is 5-1/2" tall and 5-7/8" wide so it should cover the cutout nicely. We also have the Bauer lock # BA64FR which is the same at the previously mentioned lock, only with...
  view full answer...
  
• Replacement Options For An RV Entry Trailer Lock With A 5" x 4-3/4" Cutout Hole
  The Bauer Products Motorhome Door Lock # BA64FR and it's sister option # BA65FR are the only options we carry that are close enough to fit your 5" wide by 4-3/4" tall (with minor trimming to get your 5" width to 5-1/4"). The only other option would be to contact a manufacturer like Global Link, Bauer, or Lippert to see if they have one matching your current lock or if they can custom make one for you.
  view full answer...
  

Do you have a question about this RV Door Lock?